1. Set Up the Bathtub
Unfold the bathtub completely and place it on a flat, stable surface.
Insert the six plastic support tubes into the designated side pockets to help the bathtub maintain its shape.
Inflate the top air ring using a suitable air pump until it is firm. Do not overinflate.
2. Before First Use
Before using the bathtub for the first time, rinse the inside thoroughly with warm water.
Do not use corrosive or harsh cleaning products.
In very cold conditions, allow the folded bathtub material to soften in warm water for 2–3 minutes before unfolding.
3. Fill the Bathtub
Fill the bathtub with water to a comfortable level.
For safety and to help prevent overflowing when entering the bathtub, do not fill above two-thirds of the tub's capacity.
When using warm water, ensure the water temperature does not exceed 50°C.
4. Enjoy Your Bath
Carefully enter the bathtub and adjust the water level if required.
For a warm bath, a comfortable water temperature is generally 38–42°C.
A bathing time of approximately 15–20 minutes is recommended.
5. Drain and Clean
After use, open the drainage outlet and allow the water to drain completely.
Rinse the inside of the bathtub with clean water and wipe it dry.
Do not leave water stored inside the bathtub for long periods, as this may affect the shape and condition of the product.
6. Fold and Store
Ensure the bathtub is completely empty and dry before folding.
Fold the bottom section inward, then fold both sides inward until the bathtub is compact.
Store in a clean, dry place away from excessive heat and direct sunlight.
